Ozone destructor
Ozone destructor
Ozone destructor destructs ozone based on a catalyst called manganese oxide and converts it to oxygen.
Links
The Acniti ozone destructor safely eliminates residual ozone after treatment processes in water and air applications. Using a manganese-palladium catalyst, it converts excess O3 to pure oxygen with minimal maintenance. The modular design scales from small lab setups to large ozone contact tanks - ideal for ozone system operators who need a reliable, low-hassle off-gas solution.
Nanobubble Ozonation is a highly effective water treatment process that utilizes ozone's powerful oxidizing properties to disinfect water, eliminate viruses, bacteria, and other pathogens. It also removes contaminants like iron and manganese, improving taste and odor. This method generates no harmful residuals, making it an eco-friendly choice for safe drinking water preparation.
ozone nanobubbles
Gas check valve ozone to avoid water in the ozone generator made from stainless steel 316L with viton seals
The OD-10LM-SUS-H230D is a desktop catalytic ozone destructor built for lab and research settings, running on 230V. An integrated 75W heater keeps the MnO2/Pd catalyst bed at approx. 90°C, so it stays dry and active without manual upkeep. It handles 0.1-10 LPM through SUS stainless fittings and can also run passively, with no power, as a standard ozone destructor. Rated for non-flammable, non-volatile gases only, best paired with a suction tool.
The OD-10LM-SUS-H115D is a desktop catalytic ozone destructor built for lab and research settings, running on 115V. An integrated 75W heater keeps the MnO2/Pd catalyst bed at approx. 90°C, so it stays dry and active without manual upkeep. It handles 0.1-10 LPM through SUS stainless fittings and can also run passively, with no power, as a standard ozone destructor. Rated for non-flammable, non-volatile gases only, best paired with a suction tool.
The Acniti OD-10LPM-SUS ozone destructor handles ozone-laden air or oxygen at flow rates from 0.1 to 10 LPM (6 to 600 L/h). The MnO2/Pd catalyst converts excess O3 to pure oxygen without consumables. Stainless steel SUS fittings with standard 6mm or 1/4" connections make it easy to integrate into existing ozone systems. Max ambient humidity: 75%.
The Acniti OD-25LPM-SUS ozone destructor handles ozone-laden air or oxygen at flow rates from 0.1 to 25 LPM (6 to 1500 L/h). The MnO2/Pd catalyst converts excess O3 to pure oxygen without consumables. Stainless steel SUS fittings with standard 10mm or 3/8" connections make it easy to integrate into existing ozone systems. Max ambient humidity: 75%.
The suction pump O3 decomposer draws ozone-laden air or gas through a catalytic destructor at 10 or 25 LPM, breaking down residual O3 before exhaust. Runs on 110 or 220V with a 6mm quick-connect fitting. Designed for use with acniti ozone destruction systems in aquaculture, water treatment, and industrial ozone installations.