OD-10LM-SUS-H115D Heated Ozone Destructor - Desktop, 10 LPM, 115V
The OD-10LM-SUS-H115D is a desktop catalytic ozone destructor built for lab and research settings, running on 115V. An integrated 75W heater keeps the MnO2/Pd catalyst bed at approx. 90°C, so it stays dry and active without manual upkeep. It handles 0.1-10 LPM through SUS stainless fittings and can also run passively, with no power, as a standard ozone destructor. Rated for non-flammable, non-volatile gases only, best paired with a suction tool.
Back to: Ozone Destructor
| General | |||
|---|---|---|---|
| 1 | Model name | Catalytic Ozone Destructor for Air and Water Treatment | |
| 2 | Model number | O3_waste_ozone_decomposer_heated-10lpm_dt_115V | |
| 3 | Technology | Modular Catalytic Ozone Destructor | |
| Ambient | Metric | Imperial | |
| 4 | Ambient temperature minimum | -10 ℃ | 14 ℉ |
| 5 | Ambient temperature maximum | 40 ℃ | 104 ℉ |
| 6 | Relative humidity maximum | 75 % | |
| Gas | Metric | Imperial | |
| 7 | Minimum flow / minute | 0.1 Liter | 0.0 Gallon |
| 8 | Maximum flow / minute | 10 Liter | 2.6 Gallon |
| 9 | Minimum flow / hour | 6.0 Liter | 1.6 Gallon |
| 10 | Maximum flow / hour | 600 Liter | 159 Gallon |
| 11 | Gas remark | air or oxygen containing ozone | air or oxygen containing ozone |
| Electrical | Metric | Imperial | |
| 12 | Unit phase Ø voltage | 220/230V - 50/60Hz | |
| 13 | Unit power consumption | 75W | 0.1 HP |
| Connections | |||
| 14 | Gas inlet | Standard 6mm or 1/4" | |
| Dimensions & weight | Metric | Imperial | |
| 15 | Dim. (w) x (d) x (h) | 345 x 245 x 132 mm | 13.6 x 9.6 x 5.2 inch |
| 16 | weight | 5.5 Kg | 12.1 lbs. |
| 17 | HS code | 8421.2190 | 8421.2190 |
| 18 | Shipping dim. (w)x(d)x(h) | 40 x 26 x 42 cm | 16 x 10 x 17 inch |
| 19 | Shipping weight | 8 Kg | 18 lbs. |
Dimensional drawing
Dimensional drawing of heated catalyst ozone destructor, dimensions in mm:
Back to: Ozone Destructor