Suction Pump O3 Decomposer - 10 LPM or 25 LPM, 110/220V
The suction pump O3 decomposer draws ozone-laden air or gas through a catalytic destructor at 10 or 25 LPM, breaking down residual O3 before exhaust. Runs on 110 or 220V with a 6mm quick-connect fitting. Designed for use with acniti ozone destruction systems in aquaculture, water treatment, and industrial ozone installations.
Back to: Ozone Destructor
| General | |||
|---|---|---|---|
| 1 | Model name | Catalytic Ozone Destructor for Air and Water Treatment | |
| 2 | Model number | tool_suction_pump_o3_decomposer_10_25lpm | |
| Gas | Metric | Imperial | |
| 3 | Minimum flow / minute | 0.5 Liter | 0.1 Gallon |
| 4 | Maximum flow / minute | 25 Liter | 6.6 Gallon |
| 5 | Minimum flow / hour | 30 Liter | 7.9 Gallon |
| 6 | Maximum flow / hour | 1,500.0 Liter | 396 Gallon |
| Electrical | Metric | Imperial | |
| 7 | Unit phase Ø voltage | 110 volt or 220 volt | |
| 8 | Pump motor 50Hz | 110 Watt | 0.1 hp |
| 9 | Pump motor 60Hz | 120 Watt | 0.2 hp |
| Connections | |||
| 10 | Gas inlet | 6mm quick fitting | |
| Dimensions & weight | Metric | Imperial | |
| 11 | Dim. (w) x (d) x (h) | 380 x 272 x 236 mm | 15.0 x 10.7 x 9.3 inch |
| 12 | HS code | 8413.7096 | 8413.7096 |
Dimensional drawing ozone destructor vacuum pump:
Back to: Ozone Destructor