Matomo

ECD-100 Colored Wastewater Detector Technical Specifications

The ECD-100 specification sheet provides complete technical details for this colored wastewater detector including electrical requirements, dimensional data, and sensor configuration. Designed for continuous RGB-LED color monitoring in industrial wastewater applications with automatic air purge cleaning and 4-20mA analog outputs for seamless integration into existing control systems.

Download Brochure
Colored wastewater detector sensor
Back to: ECD-100 Color
DescriptionMetricImperial
1 Model name ECD-100 Specifications: Color Detector Technical Data | Acni ECD-100 Specifications: Color Detector Technical Data | Acni
2 Model number ECD-100 ECD-100
3 Technology Visible light absorption photometry Visible light absorption photometry
AmbientMetricImperial
4 Ambient temperature maximum 40 ℃ 104 ℉
ElectricalMetricImperial
5 Unit phase Ø voltage AC 100 V ±10%, 50/60 Hz AC 100 V ±10%, 50/60 Hz
6 Unit power consumption 6 watts 6 watts
Dimensions & weightMetricImperial
7 HS code 9027-9090 9027-9090

ItemSpecification
Detection TargetTreated water, effluent, discharge water, etc.
Light SourceLED (400~700nm)
Measurement Range0~100% (Transmittance), 0.00~2.00 Abs (Absorbance), 0~100% (Attenuation)
Measurement Cycle5 seconds (excluding cleaning time)
Response Time30 seconds
Installation MethodSensor: Underwater immersion
Control: Pole or flat surface mount
Dimension & MassControl Unit: 160(W) × 260(H) × 130(D) mm, Approx. 2.2kg
Sensor Unit: 90 × 300(H) mm, Approx. 1.2kg
Hose length: 5m
Analog OutputDC 4~20mA × 2 channels (Select any 2 from R, G, or B)
Signal Output

Voltage-free contacts × 3 systems (Concentration Alarm × 2, Error Signal × 1)

Solenoid valve control signal × 1

Voltage-free contact AC300V 1.2A (Non-polar)

Cleaning MethodCompressed air 0.05~0.50 MPa (Compressed air supply must be prepared separately)

Back to: ECD-100 Color