microStar Ozon-nanobellengenerator - Laagste energieverbruik voor industriële waterzuivering

Slideshow Items

  • acniti microstar nanobubbel generator fs302 en fs402
  • acniti microstar nanobubbel generator fs752dc
  • acniti microstar nanobellengenerator fs302 in watertank
  • acniti microstar nanobubbel generator fs302
  • acniti microstar nanobubbel generator
  • acniti microstar nanobubbel generator fs402
  • acniti microstar nanobubbel generator fs402
  • microstar 302 in watertank, met vacuüm ozonafbrekingssysteem
  • microstar overzicht nanobellengenerator
  • microstar overzicht nanobellengenerator
  • Microstar test opstelling met ozongenerator en ozonsensoren.
  • microstar nanobubbel generator frequentieregelaar

microStar Overzicht

Hamerrotatie

De microStar gebruikt een uniek concept voor het genereren van nanobellen, dat we hamerrotatie noemen. Het hamerrotatieconcept van de microStar gebruikt de minste hoeveelheid energie in de industrie om nanobellen te genereren. De microStar laat gas los in een buis en heeft roterende hamers in de buis die het gas tot nanobellen verpletteren.

Geen turbulentie

Een ander uniek kenmerk van dit apparaat is dat het geen turbulentie of sterke beweging in het water genereert in vergelijking met nanobellengeneratoren die een pomp gebruiken. Dit maakt de microStar de perfecte nanobellengenerator voor projecten waar hoge concentraties gas en nanobellen nodig zijn en turbulentie of sterke stromingen in het water vermeden moeten worden. Denk aan projecten als het wassen van eieren om bacteriën te verwijderen of bacteriebedfilters die niet gestoord mogen worden, maar voldoende gas nodig hebben.

Neem contact met ons op voor meer informatie over dit unieke product. Momenteel hebben we 3 maten beschikbaar. De kleinste unit is uitstekend geschikt voor research doeleinden, de twee grotere units kunnen voor productie doeleinden worden ingezet.

Models & Specs

1. Nanobubble generator

indicationname
FSmicroStar

2. Motor nominal input

indicationmotor nominal input
3030 Watt
40400 Watt
15150 Watt
75750 Watt

3. Motor voltage

indicationmotor voltage
1100V~110V (AC models only)
2200V~220V (AC and DC models)

4. Motor Power

indicationpower type
ACAC powered motor
DCDC powered motor, high-spec higher nanobubble concentration.

5. microStar model

indicationnozzle
"S"short type
"L"long type (not available now)

6. Nanobubbles discharge

indication# directions
"W"2 directions
"S"1 direction

7. microStar Throughput and Bubble discharge size

indicationthroughput / maximum micro bubble discharge size (reference value)
"1"Standard / 1-30μm peak
"2"Medium / 20-60μm peak
"3"Large / mixing purpose only (no UFB generation) * special order model

8. microStar special specs, special sign for customized model

indicationspecifications
"Sp"special
Microstar test opstelling met ozongenerator en ozonsensoren.
  • Meest energie-efficiënte nanobellengenerator op de markt
  • Sterk in het oplossen van hoge concentraties ozon
  • Geoptimaliseerd voor het maken van ozon nanobubbels
  • Uitstekend hulpmiddel voor ultrafijne bubbels voor onderzoek
  • Maakt geen turbulentie in het water
  • Bewezen staat van dienst in de oesterschelpindustrie
  • Geschikt voor het verwijderen van uitwendinge infecties met norovirus, legionella, lysteria en salmonella bij levende dieren.
  • Levensduur motor 80.000 uur

modellen

Specificaties

  • ModelnaammicroStar FS302AC-SW1
    ModelnummerFS302AC-SW1
    SpecificatiebladmicroStar FS302AC-SW1
    VloeistofMetrischImperial
    Stroom / minuut 14 Liter4 Gallon
    Stroom / uur 840 Liter222 Gallon
    watertemperatuur minimum0 ℃32 ℉
    maximale watertemperatuur40 ℃104 ℉
    AmbientMetrischImperial
    Omgevingstemperatuur minimaal-20 ℃-4 ℉
    Omgevingstemperatuur maximum40 ℃104 ℉
    GasMetrischImperial
    Minimale stroom / minuut0.5 Liter0.1 Gallon
    Maximale stroom / minuut1.0 Liter0.3 Gallon
    Minimale stroom / uur30 Liter7.9 Gallon
    Maximale stroom / uur60 Liter16 Gallon
    Druk minimum 50 kPa7 PSI
    Druk maximum 200 kPa29 PSI
    GaskwaliteitO2, O3, CO2, lucht, N2
    Electrisch
    Eenheid fase Ø spanning3 Ø 200/220
    Stroomverbruik eenheid30 watt
    BesturingFrequentieaandrijving
    Afmetingen en gewichtMetrischImperial
    Dim. (l) x (b) x (h)150 x 150 x 330 mm5.9 x 5.9 x 13.0 inch
    gewicht3.5 Kg7.7 lbs
    Verzend afm. (b)x(d)x(h)58 x 43 x 29 cm23 x 17 x 11 inch
    Verzendgewicht:16.2 Kg36 lbs
    • Acniti levert een vooraf ingestelde frequentieregelaar en transformator om te converteren naar het lokale elektriciteitsnetwerk. De units zijn plug-and-plays.
    • Zeewatergebruik mogelijk
  • ModelnaammicroStar FS752DC-1
    ModelnummerFS752DC-__1
    SpecificatiebladmicroStar FS752DC-1
    VloeistofMetrischImperial
    Stroom / minuut 300 Liter79 Gallon
    Stroom / uur 18,000 Liter4,755.1 Gallon
    watertemperatuur minimum0 ℃32 ℉
    maximale watertemperatuur40 ℃104 ℉
    AmbientMetrischImperial
    Omgevingstemperatuur minimaal-20 ℃-4 ℉
    Omgevingstemperatuur maximum40 ℃104 ℉
    GasMetrischImperial
    Minimale stroom / minuut0.0 Liter0.0 Gallon
    Maximale stroom / minuut30 Liter7.9 Gallon
    Minimale stroom / uur0.0 Liter0.0 Gallon
    Maximale stroom / uur1,800.0 Liter476 Gallon
    GaskwaliteitLucht, O2, O3, N2, CO2
    Electrisch
    Eenheid fase Ø spanningIn: 3 Ø 200 VAC => Uit: 3 Ø 200VDC
    Stroomverbruik eenheid750 watt
    Natte delenEthylene propylene, FKM, Fluor, PVC, SUS316L, SUS316, POM
    Pomp modelMotor model: 4 poles SPM type brushless DC motor
    BesturingFrequentieaandrijving
    Aansluitingen
    Water inlaatonderdompelen tot de juiste diepte volgens de handleiding
    Gas inlaat22mm
    Afmetingen en gewichtMetrischImperial
    Dim. (l) x (b) x (h)230 x 230 x 640 mm9.1 x 9.1 x 25.2 inch
    gewicht18 Kg39.7 lbs
    Verzend afm. (b)x(d)x(h)40 x 40 x 80 cm16 x 16 x 31 inch
    Verzendgewicht:40 Kg88 lbs
    • The microstar 752 series generates effectively nanobubbles in a 10 meter diameter circel with a depth of 2 meter for short model (SS / SW).
    • De micorstar 752-serie is verkrijgbaar met een 2-weg (W) of 1-weg wateruitlaat (S).
    • MicroStar is niet geschikt voor gebruik onder water.
    • De Microstar DC-serie vereist een koelventilator bovenop de motor, die een eenfase-ingang van 100 ~ 115 of 200 ~ 240 wisselspanning nodig heeft. 10 ~ 15 Watt
    • Regelmatig onderhoud: pakking en oliekeerring vervangen
  • ModelnaammicroStar FS752DC-SS3
    ModelnummerFS752DC-SS3
    SpecificatiebladmicroStar FS752DC-SS3
    VloeistofMetrischImperial
    Stroom / minuut 400 Liter106 Gallon
    Stroom / uur 24,000 Liter6,340.1 Gallon
    watertemperatuur minimum0 ℃32 ℉
    maximale watertemperatuur40 ℃104 ℉
    AmbientMetrischImperial
    Omgevingstemperatuur minimaal-20 ℃-4 ℉
    Omgevingstemperatuur maximum40 ℃104 ℉
    GasMetrischImperial
    Minimale stroom / minuut0.0 Liter0.0 Gallon
    Maximale stroom / minuut110 Liter29 Gallon
    Minimale stroom / uur0.0 Liter0.0 Gallon
    Maximale stroom / uur6,600.0 Liter1,743.5 Gallon
    GaskwaliteitLucht, O2, (O3), N2, CO2
    Electrisch
    Eenheid fase Ø spanningIn: 3 Ø 200 VAC => Uit: 3 Ø 200VDC
    Stroomverbruik eenheid750 watt
    Natte delenEthylene propylene, FKM, Fluor, PVC, SUS316L, SUS316, POM
    Pomp modelMotor model: 4 poles SPM type brushless DC motor
    BesturingFrequentieaandrijving
    Aansluitingen
    Water inlaatonderdompelen tot de juiste diepte volgens de handleiding
    Gas inlaat22mm
    Afmetingen en gewichtMetrischImperial
    Dim. (l) x (b) x (h)230 x 230 x 640 mm9.1 x 9.1 x 25.2 inch
    gewicht18 Kg39.7 lbs
    Verzend afm. (b)x(d)x(h)40 x 80 x 40 cm16 x 31 x 16 inch
    Verzendgewicht:20 Kg44 lbs
    • The microstar 752 series generates effectively nanobubbles in a 10 meter diameter circel with a depth of 2 meter for short model (SS / SW).
    • MicroStar is niet geschikt voor gebruik onder water.
    • De Microstar DC-serie vereist een koelventilator bovenop de motor, die een eenfase-ingang van 100 ~ 115 of 200 ~ 240 wisselspanning nodig heeft. 10 ~ 15 Watt
    • Regelmatig onderhoud: pakking en oliekeerring vervangen

Veelgestelde vragen

  1. What is the microStar Ozone nanobubble generator?

    The microStar Ozone is a motor-driven nanobubble generator that uses patented magnetic hammer-rotation technology to crush ozone gas into ultra-fine nanobubbles without requiring high-pressure pumps. Hammers mounted on a shaft rotate at 3,400 RPM inside a vertical tube, mechanically shearing gas into nanobubbles with zero water turbulence—ideal for applications like egg washing, bacteria bed filters, and advanced oxidation processes where flow disturbance must be minimized.

  2. How does magnetic hammer-rotation differ from pump-based nanobubble generators?

    Unlike traditional systems from Acniti and Competitors that rely on pressurized water pumps ranging from 15–120 PSI, the microStar uses a low-energy motor (30W–750W) to generate nanobubbles through mechanical hammer impact. This eliminates the need for high-flow water recirculation, reducing energy consumption by up to 70% compared to venturi or vortex pump systems. The hammer-rotation method also produces zero turbulence, making it suitable for delicate biofilm applications where pump-driven agitation would damage biological filters.

  3. What power options are available for the microStar Ozone?

    The microStar offers four motor configurations: ​

    • 30W model: Research labs and benchtop testing
    • 150W model: Small-scale production (pilot systems)
    • 400W model: Medium industrial applications
    • 750W model: Large-scale water treatment facilities
    All models are available in AC (100–110V or 200–220V) and DC (200–220V) versions. DC models deliver higher nanobubble concentrations due to more stable motor performance.

  4. Does the microStar require high water pressure to operate?

    No. The microStar operates at ambient pressure (no pressurization required), unlike competing nanobubble systems that demand 5–8 bar (72–116 PSI) to function. This eliminates the need for expensive high-pressure ozone generators or ozone compressors—common cost barriers in traditional ozone nanobubble setups. Water enters the top of the unit via gravity or low-head feed (0.5–1.5m head), making installation simpler and safer.

Misschien vind je het ook leuk...