Slideshow Items

  • nanobubbles

The Turbiti O2 is the multipurpose ultrafine bubble generator suitable for agriculture, horticulture and fish cultivation sites. The Turbiti O2 must be combined with an oxygen generator, which creates 90% pure oxygen out of air.

Inside the turbiti O2 is Acniti’s low pressure static mixer swirl flow technology, which creates billions of nano-sized bubbles by beating up the gas water mixture. The Turbiti O2 is flexible to implement, as it can be used with a wide array of pumps.

The turbiti O2 is used for aerating fishponds with nanobubbles. Super saturation of oxygen for water day storage tanks in horticulture. Drinking water solutions for chicken, cows, pigs and horses, giving high DO water with ultrafine bubbles to animals with enhance their food digestion more efficiently and results in healthier animals.

Turbiti wall mounted nanobubble mixer with enhanced aeration technology

  • Clean Tech – Chemical free cleaning solutions
  • easy to implement in existing installations
  • efficient gas dissolution and ultrafine bubble production
  • uses turbiti nanobubble production technology
  • systems in use for poultry and livestock drinking water
  • nanobubble production for irrigation ponds for agriculture
  • combined in wastewater treatment systems
  • special chemical and hydrochloric acid resistant version available

Model

Spezifikationen

  • ModellnameTurbiti 727 O2 in wall mounted enclosure
    Modellnummerturbiti_727_wallmount_galvanized-box
    LastenheftTurbiti 727 O2 in wall mounted enclosure
    FlüssigkeitMetrischKaiserlich
    Mindestdurchfluss / Minute 75 Liter20 Gallone
    Maximaler Durchfluss / Minute 150 Liter40 Gallone
    Mindestdurchfluss / Stunde 4.5 M3158.9 CF
    Maximaler Durchfluss / Stunde 9.0 M3317.8 CF
    Wassertemperatur Minimum-20 ℃-4 ℉
    Wassertemperatur maximal50 ℃122 ℉
    Verfügbarkeit und Größe des SchmutzfängersNo strainer on the equipment, strainer required when particles larger than 1 or 2 mm.
    Empfohlene(r) EinlassfilterMedium pump inlet filter series
    UmgebungMetrischKaiserlich
    Minimale Umgebungstemperatur-20 ℃-4 ℉
    Maximale Umgebungstemperatur50 ℃122 ℉
    Relative Luftfeuchtigkeit Minimum0 %0 %
    Relative Luftfeuchtigkeit maximal100 %100 %
    GasMetrischKaiserlich
    Mindestdurchfluss / Minute2.5 Liter0.7 Gallone
    Maximaler Durchfluss / Minute5.0 Liter1.3 Gallone
    Mindestdurchfluss / Stunde150 Liter40 Gallone
    Maximaler Durchfluss / Stunde300 Liter79 Gallone
    Druck Minimum 50 kPa7 PSI
    Druck maximal 350 kPa51 PSI
    GasqualitätNo corrosive gasses: suitable for O2, air, CO2, N2
    Gas BemerkungThe mentioned pressures are recommended pressures for bubble generation. The product itself can withstand pressures up to 500 kPa.
    Elektrisch
    Stromverbrauch der EinheitNo pump included with this product. Estimated power consumption 750-1000 watts.
    Benetzte Teilenylon based resins, PVC, EPDM rubber
    PumpenmodellRecommended: use of a low head centrifugal pump or pool pump
    Einstellung des PumpendrucksThis product works well with most low head pumps. Head 10 to 15 meters. (Ask us for more details).
    KontrolleManual by pressure gauche
    Pumpe
    @optionEbara-Matrix-5-3
    Verbindungen
    WassereinlassRigid Rc 1" female coupling with thread
    Wasserauslassrigid Rc 3/4" female coupling with thread
    Gaseinlass10 mm standard quick fitting, 3/8 on request
    Abmessungen & GewichtMetrischKaiserlich
    Abm. (B) x (T) x (H)644 x 200 x 1040 mm25.4 x 7.9 x 40.9 Zoll
    Gewicht26.5 Kg58.4 lbs.
    Versandmaße. (b)x(d)x(h)67 x 37 x 107 cm26 x 15 x 42 Zoll
    Versandgewicht35 Kg77 lbs.
    • Easy to integrate with existing pool pumps
  • ModellnameTurbiti 737 O2 in wall mounted enclosure
    Modellnummerturbiti_737_wallmount_galvanized-box
    LastenheftTurbiti 737 O2 in wall mounted enclosure
    FlüssigkeitMetrischKaiserlich
    Mindestdurchfluss / Minute 150 Liter40 Gallone
    Maximaler Durchfluss / Minute 400 Liter106 Gallone
    Mindestdurchfluss / Stunde 9.0 M3317.8 CF
    Maximaler Durchfluss / Stunde 24 M3848 CF
    Wassertemperatur Minimum-20 ℃-4 ℉
    Wassertemperatur maximal50 ℃122 ℉
    Verfügbarkeit und Größe des SchmutzfängersNo strainer on the equipment, strainer required when particles larger than 1 or 2 mm.
    Empfohlene(r) EinlassfilterMedium pump inlet filter series
    UmgebungMetrischKaiserlich
    Minimale Umgebungstemperatur-20 ℃-4 ℉
    Maximale Umgebungstemperatur50 ℃122 ℉
    Relative Luftfeuchtigkeit Minimum0 %0 %
    Relative Luftfeuchtigkeit maximal100 %100 %
    GasMetrischKaiserlich
    Mindestdurchfluss / Minute5.0 Liter1.3 Gallone
    Maximaler Durchfluss / Minute8.0 Liter2.1 Gallone
    Mindestdurchfluss / Stunde300 Liter79 Gallone
    Maximaler Durchfluss / Stunde480 Liter127 Gallone
    Druck Minimum 50 kPa7 PSI
    Druck maximal 300 kPa44 PSI
    GasqualitätNo corrosive gasses: suitable for O2, air, CO2, N2
    Gas BemerkungThe mentioned pressures are recommended pressures for bubble generation. The product itself can withstand pressures up to 500 kPa.
    Elektrisch
    Stromverbrauch der EinheitNo pump included with this product. Estimated power consumption 750-1000 watts.
    Benetzte Teilenylon based resins, PVC, EPDM rubber
    PumpenmodellRecommended: use of a low head centrifugal pump or pool pump
    Einstellung des PumpendrucksThis product works well with most low head pumps. Head 10 to 15 meters. (Ask us for more details).
    KontrolleManual by pressure gauche
    Verbindungen
    WassereinlassRigid Rc 2" female coupling with thread
    Wasserauslassrigid Rc 1" female coupling with thread
    Gaseinlass10 mm standard quick fitting, 3/8 on request
    Abmessungen & GewichtMetrischKaiserlich
    Abm. (B) x (T) x (H)644 x 200 x 1040 mm25.4 x 7.9 x 40.9 Zoll
    Gewicht26.5 Kg58.4 lbs.
    Versandmaße. (b)x(d)x(h)67 x 37 x 107 cm26 x 15 x 42 Zoll
    Versandgewicht35 Kg77 lbs.
    • Easy to integrate with existing pool pumps
  • ModellnameTurbiti 747 O2 in wall mounted enclosure
    Modellnummerturbiti_747_wallmount_galvanized-box
    LastenheftTurbiti 747 O2 in wall mounted enclosure
    FlüssigkeitMetrischKaiserlich
    Mindestdurchfluss / Minute 400 Liter106 Gallone
    Maximaler Durchfluss / Minute 600 Liter159 Gallone
    Mindestdurchfluss / Stunde 24 M3848 CF
    Maximaler Durchfluss / Stunde 36 M31,271 CF
    Wassertemperatur Minimum-20 ℃-4 ℉
    Wassertemperatur maximal50 ℃122 ℉
    Verfügbarkeit und Größe des SchmutzfängersNo strainer on the equipment, strainer required when particles larger than 1 or 2 mm.
    Empfohlene(r) EinlassfilterMedium pump inlet filter series
    UmgebungMetrischKaiserlich
    Minimale Umgebungstemperatur-20 ℃-4 ℉
    Maximale Umgebungstemperatur50 ℃122 ℉
    Relative Luftfeuchtigkeit Minimum0 %0 %
    Relative Luftfeuchtigkeit maximal100 %100 %
    GasMetrischKaiserlich
    Mindestdurchfluss / Minute5.0 Liter1.3 Gallone
    Maximaler Durchfluss / Minute8.0 Liter2.1 Gallone
    Mindestdurchfluss / Stunde300 Liter79 Gallone
    Maximaler Durchfluss / Stunde480 Liter127 Gallone
    Druck Minimum 50 kPa7 PSI
    Druck maximal 300 kPa44 PSI
    GasqualitätNo corrosive gasses: suitable for O2, air, CO2, N2
    Gas BemerkungThe mentioned pressures are recommended pressures for bubble generation. The product itself can withstand pressures up to 500 kPa.
    Elektrisch
    Stromverbrauch der EinheitNo pump included with this product. Estimated power consumption 1500-2000 watts.
    Benetzte Teilenylon based resins, PVC, EPDM rubber
    PumpenmodellRecommended: use of a low head centrifugal pump or pool pump
    Einstellung des PumpendrucksThis product works well with most low head pumps. Head 10 to 15 meters. (Ask us for more details).
    KontrolleManual by pressure gauche
    Verbindungen
    WassereinlassRigid Rc 2" female coupling with thread
    Wasserauslassrigid Rc 1.5" female coupling with thread
    Gaseinlass10 mm standard quick fitting, 3/8 on request
    Abmessungen & GewichtMetrischKaiserlich
    Abm. (B) x (T) x (H)644 x 200 x 1040 mm25.4 x 7.9 x 40.9 Zoll
    Gewicht26.5 Kg58.4 lbs.
    Versandmaße. (b)x(d)x(h)67 x 37 x 107 cm26 x 15 x 42 Zoll
    Versandgewicht35 Kg77 lbs.
    • Easy to integrate with existing pool pumps