Matomo

Slideshow Items

  • Einlassfilter RF200RW
  • selbstreinigender Einlassfilter RF300 - Image 2
  • RF400A Selbstreinigender Ansaugfilter mit 300 Mikron Maschenweite - Image 3
  • RF400A selbstreinigender Schmutzfänger - Image 4
  • RF400R selbstreinigender Schmutzfänger - Image 5
  • RF400R selbstreinigender Schmutzfänger - Image 6

Beschreibung des Produkts

Mittlere Ansaugfilter-Serie

Die selbstreinigenden Pumpeneinlassfilter RF200 ~ RF400 bieten Schutz vor Verstopfungen für Aufputzpumpen und andere angeschlossene Geräte. Es handelt sich um Schmutzwassersaugfilter aus Edelstahl mit einer Kapazität von 220 bis 1000 Litern/Minute (14~60 m3 pro Stunde), die bis zu 50 Mikron filtern können.

Der RF A-Filter kann mit austauschbaren Nylongewebeeinsätzen ausgestattet werden. Im Durchschnitt müssen die Nylongewebeeinsätze alle 5000 Stunden im Dauerbetrieb für 300-Mikron-Gewebe und 1000 - 2000 Stunden im Dauerbetrieb für 60- und 115-Mikron-Gewebe ausgetauscht werden, obwohl diese Wartungsintervalle je nach Wasserbedingungen variieren.

Der RF AS kann mit einem feinen Edelstahlfiltergewebe ausgestattet werden und muss in ähnlichen Intervallen gewaschen werden.

Die RF RW- und RP-Serien sind mit einem groben, perforierten Edelstahlgewebe mit 1,2,3 oder 6 mm großen Löchern ausgestattet.

Diese Filter nutzen einen Teil der Pumpenleistung, um einen internen Rückspülrotor zu speisen. Diese Zufuhr wird von der bereits gefilterten Pumpenleistung entnommen. Die Zwillingsdüsen des Reinigungsrotors drehen sich in jedem Filter mit etwa 60 Umdrehungen pro Minute und reinigen das gesamte Sieb alle ½ Sekunde. Da sich der Reinigungsmechanismus auf der gefilterten Seite des Siebs befindet, können Verunreinigungen im Wasser den Mechanismus nicht behindern. Zwischen 16 und 25 % der Pumpenleistung werden benötigt, um den Reinigungsrotor zu versorgen.

Die niedrige Ansauggeschwindigkeit der Filter sorgt dafür, dass sie, wenn sie mit einem 2 mm dicken Edelstahlgewebe ausgestattet sind, die aktuellen europäischen Vorschriften zum Schutz von Aalen und die US EPA-Regel 316(b) zum Schutz von Fischen erfüllen.

systemübersicht ansaugfilter sieb rf200

Für größere Kapazitäten empfehlen wir unsere RF600-Serie für 1500 bis 4600 Liter pro Minute. Alle unsere Filter und Siebe verwenden dieselbe patentierte Technologie, die eine effiziente selbstreinigende Rückspülung ermöglicht, um das Filtergewebe für eine Reihe von Durchflussraten frei zu halten.

Tabelle: Volumen und Maschenweiten

Liter / min50 μm60 μm100 μm115 μm300 μm315 μm1 mm2 mm3 mm6 mm
220RF200ASRF200ARF200ASRF200ARF200ARF200ASRF200RWRF200RWRF200RPRF200RP
560RF300ASRF300ASRF300ASRF300RWRF300RWRF300RPRF300RP
1000RF400ARSRF400ARSRF400ARSRF400ARWRF400ARWRF400RPRF400RP

Medium Pumpeneinlassfilter Serie

  • Starkes Nylon-Filtergewebe
  • Filtert bis zu 50 Mikrometer
  • Hohe Zuverlässigkeit und einfache Bedienung
  • Funktioniert mit den meisten Zentrifugal- und Exzenterschneckenpumpen
  • 14~60 Kubikmeter pro Stunde maximaler Durchfluss
  • Geringere Kapital-, Installations- und Wartungskosten
  • Reduziert den Bedarf an Absetzbecken

Model

Auswahltabelle für Einlassfilter, Siebvolumen und Maschenweite gallon / min

    • Maschenweiten: 60 μm, 115 μm, 300 μm
    • Wasserversorgung: Tapped from outside of main pump
    • Verbindung Haupt: 2" BSP male thread
    • Anschluss Rückspülung: 3/4" union
    • Kapazität: 220 Liter / min, 13 m3/h
    • Rückspülung: 40 zu 55 Liter / min, 2.4 zu 3.3 m3/h
    • example pump flow: 220 + 40 = 260 Liter / min

    • Rückspülung Druck: 20 to 50 kPa do not exceed 100 kPa. Depending on pressure rotor will run at 60-122 RPM. kPa

    • Größe mm: 206 (h) 210 (Ø)
    • Gewicht: 4 kg
    • Kapazität: 58 GPM
    • Rückspülung: 11 GPM zu 14.52946 GPM
    • example pump flow: 58 + 11 = 69

    • Kapazität: 3,487 GPH
    • Rückspülung: 634 GPH zu 872 GPH
    • Example pump flow: 3,487 + 634 = 4,121

    • Rückspülung Druck: 20 to 50 kPa do not exceed 100 kPa. Depending on pressure rotor will run at 60-122 RPM. kPa

    • Größe Zoll: 8.1 (h) 8.3 (Ø)
    • Gewicht: 9 lb
    • Material: nylon mesh in polypropylene inserts
    • Käfig: 316 stainless steel
    • zentrale Turbine: 316 Stainless Steel
    • Jets: 316 stainless steel
    • Lager: acetal copolymer
    • Maschenweiten: 50 μm, 100 μm, 315 μm
    • Wasserversorgung: Tapped from outside of main pump
    • Verbindung Haupt: 2" BSP male thread
    • Anschluss Rückspülung: 3/4" union
    • Kapazität: 220 Liter / min, 13 m3/h
    • Rückspülung: 40 zu 55 Liter / min, 2.4 zu 3.3 m3/h
    • example pump flow: 220 + 40 = 260 Liter / min

    • Rückspülung Druck: 20 to 50 kPa do not exceed 100 kPa. Depending on pressure rotor will run at 60-122 RPM. kPa

    • Größe mm: 206 (h) 210 (Ø)
    • Gewicht: 5 kg
    • Kapazität: 58 GPM
    • Rückspülung: 11 GPM zu 14.52946 GPM
    • example pump flow: 58 + 11 = 69

    • Kapazität: 3,487 GPH
    • Rückspülung: 634 GPH zu 872 GPH
    • Example pump flow: 3,487 + 634 = 4,121

    • Rückspülung Druck: 20 to 50 kPa do not exceed 100 kPa. Depending on pressure rotor will run at 60-122 RPM. kPa

    • Größe Zoll: 8.1 (h) 8.3 (Ø)
    • Gewicht: 11 lb
    • Material: sintered 316 stainless steel mesh
    • Käfig: 316 stainless steel
    • zentrale Turbine: 316 stainless steel
    • Jets: 316 stainless steel
    • Lager: acetal copolymer
    • Maschenweiten: 1 mm, 2 mm
    • Wasserversorgung: Tapped from outside of main pump
    • Verbindung Haupt: 2" BSP male thread
    • Anschluss Rückspülung: 3/4" union
    • Kapazität: 220 Liter / min, 13 m3/h
    • Rückspülung: 24 zu 48 Liter / min, 1.44 zu 2.88 m3/h
    • example pump flow: 220 + 24 = 244 Liter / min

    • Rückspülung Druck: 20 to 50 kPa do not exceed 100 kPa. Depending on pressure rotor will run at 60-122 RPM. kPa

    • Größe mm: 206 (h) 210 (Ø)
    • Gewicht: 4 kg
    • Kapazität: 58 GPM
    • Rückspülung: 6 GPM zu 12.680256 GPM
    • example pump flow: 58 + 6 = 64

    • Kapazität: 3,487 GPH
    • Rückspülung: 380 GPH zu 761 GPH
    • Example pump flow: 3,487 + 380 = 3,867

    • Rückspülung Druck: 20 to 50 kPa do not exceed 100 kPa. Depending on pressure rotor will run at 60-122 RPM. kPa

    • Größe Zoll: 8.1 (h) 8.3 (Ø)
    • Gewicht: 9 lb
    • Material: woven
    • Käfig: 316 stainless steel
    • zentrale Turbine: 316 Stainless Steel
    • Jets: food grade natural rubber
    • Maschenweiten: 3 mm, 6 mm
    • Wasserversorgung: Tapped from outside of main pump
    • Verbindung Haupt: 2" BSP male thread
    • Anschluss Rückspülung: 3/4" union
    • Kapazität: 220 Liter / min, 13 m3/h
    • Rückspülung: 24 zu 48 Liter / min, 1.44 zu 2.88 m3/h
    • example pump flow: 220 + 24 = 244 Liter / min

    • Rückspülung Druck: 20 to 50 kPa do not exceed 100 kPa. Depending on pressure rotor will run at 60-122 RPM. kPa

    • Größe mm: 206 (h) 210 (Ø)
    • Gewicht: 4 kg
    • Kapazität: 58 GPM
    • Rückspülung: 6 GPM zu 12.680256 GPM
    • example pump flow: 58 + 6 = 64

    • Kapazität: 3,487 GPH
    • Rückspülung: 380 GPH zu 761 GPH
    • Example pump flow: 3,487 + 380 = 3,867

    • Rückspülung Druck: 20 to 50 kPa do not exceed 100 kPa. Depending on pressure rotor will run at 60-122 RPM. kPa

    • Größe Zoll: 8.1 (h) 8.3 (Ø)
    • Gewicht: 9 lb
    • Material: perforated 316 stainless steel
    • Käfig: 316 stainless steel
    • zentrale Turbine: 316 stainless steel
    • Jets: food grade natural rubber
    • Lager: acetal copolymer
    • Maschenweiten: 50 μm, 100 μm, 315 μm
    • Wasserversorgung: Tapped from outside of main pump
    • Verbindung Haupt: 2.5" BSP male thread
    • Anschluss Rückspülung: 1.1/4″ BSP union
    • Kapazität: 560 Liter / min, 34 m3/h
    • Rückspülung: 112 zu 140 Liter / min, 6.72 zu 8.4 m3/h
    • example pump flow: 560 + 112 = 672 Liter / min

    • Rückspülung Druck: 20 to 50 kPa do not exceed 100 kPa. Depending on pressure rotor will run at 60-122 RPM. kPa

    • Größe mm: 310 (h) 335 (Ø)
    • Gewicht: 11 kg
    • Kapazität: 148 GPM
    • Rückspülung: 30 GPM zu 36.98408 GPM
    • example pump flow: 148 + 30 = 178

    • Kapazität: 8,876 GPH
    • Rückspülung: 1,775 GPH zu 2,219 GPH
    • Example pump flow: 8,876 + 1,775 = 10,651

    • Rückspülung Druck: 20 to 50 kPa do not exceed 100 kPa. Depending on pressure rotor will run at 60-122 RPM. kPa

    • Größe Zoll: 12.2 (h) 13.2 (Ø)
    • Gewicht: 24 lb
    • Material: sintered 316 stainless steel mesh
    • Käfig: 316 stainless steel
    • zentrale Turbine: 316 stainless steel
    • Jets: 316 stainless steel
    • Lager: acetal copolymer
    • Maschenweiten: 1 mm, 2 mm
    • Wasserversorgung: Tapped from outside of main pump
    • Verbindung Haupt: 2.5" BSP male thread
    • Anschluss Rückspülung: 1.1/4″ BSP union
    • Kapazität: 560 Liter / min, 34 m3/h
    • Rückspülung: 112 zu 140 Liter / min, 6.72 zu 8.4 m3/h
    • example pump flow: 560 + 112 = 672 Liter / min

    • Rückspülung Druck: 20 to 50 kPa do not exceed 100 kPa. Depending on pressure rotor will run at 60-122 RPM. kPa

    • Größe mm: 310 (h) 335 (Ø)
    • Gewicht: 11 kg
    • Kapazität: 148 GPM
    • Rückspülung: 30 GPM zu 36.98408 GPM
    • example pump flow: 148 + 30 = 178

    • Kapazität: 8,876 GPH
    • Rückspülung: 1,775 GPH zu 2,219 GPH
    • Example pump flow: 8,876 + 1,775 = 10,651

    • Rückspülung Druck: 20 to 50 kPa do not exceed 100 kPa. Depending on pressure rotor will run at 60-122 RPM. kPa

    • Größe Zoll: 12.2 (h) 13.2 (Ø)
    • Gewicht: 24 lb
    • Material: woven
    • Käfig: 316 stainless steel
    • zentrale Turbine: 316 stainless steel
    • Jets: food grade natural rubber
    • Maschenweiten: 3 mm, 6 mm
    • Wasserversorgung: Tapped from outside of main pump
    • Verbindung Haupt: 2.5" BSP male thread
    • Anschluss Rückspülung: 1.1/4″ BSP union
    • Kapazität: 560 Liter / min, 34 m3/h
    • Rückspülung: 112 zu 140 Liter / min, 6.72 zu 8.4 m3/h
    • example pump flow: 560 + 112 = 672 Liter / min

    • Rückspülung Druck: 20 to 50 kPa do not exceed 100 kPa. Depending on pressure rotor will run at 60-122 RPM. kPa

    • Größe mm: 310 (h) 335 (Ø)
    • Gewicht: 11 kg
    • Kapazität: 148 GPM
    • Rückspülung: 30 GPM zu 36.98408 GPM
    • example pump flow: 148 + 30 = 178

    • Kapazität: 8,876 GPH
    • Rückspülung: 1,775 GPH zu 2,219 GPH
    • Example pump flow: 8,876 + 1,775 = 10,651

    • Rückspülung Druck: 20 to 50 kPa do not exceed 100 kPa. Depending on pressure rotor will run at 60-122 RPM. kPa

    • Größe Zoll: 12.2 (h) 13.2 (Ø)
    • Gewicht: 24 lb
    • Material: perforated 304 stainless steel
    • Käfig: 316 stainless steel
    • zentrale Turbine: 316 stainless steel
    • Jets: food grade natural rubber
    • Lager: acetal copolymer
    • Maschenweiten: 50 μm, 100 μm, 315 μm
    • Wasserversorgung: Tapped from outside of main pump
    • Verbindung Haupt: 3"
    • Anschluss Rückspülung: 1.5"
    • Kapazität: 1,000 Liter / min, 60 m3/h
    • Rückspülung: 100 zu 150 Liter / min, 6 zu 9 m3/h
    • example pump flow: 1,000 + 100 = 1,100 Liter / min


    • Größe mm: 354 (h) 420 (Ø)
    • Gewicht: 19 kg
    • Kapazität: 264 GPM
    • Rückspülung: 26 GPM zu 39.6258 GPM
    • example pump flow: 264 + 26 = 291

    • Kapazität: 15,850 GPH
    • Rückspülung: 1,585 GPH zu 2,378 GPH
    • Example pump flow: 15,850 + 1,585 = 17,435


    • Größe Zoll: 13.9 (h) 16.5 (Ø)
    • Gewicht: 42 lb
    • Material: micron sintered stainless steel top mesh
    • Käfig: 316 stainless steel
    • zentrale Turbine: 316 stainless steel
    • Jets: food grade natural rubber
    • Lager: acetal copolymer
    • Maschenweiten: 1 mm, 2 mm
    • Wasserversorgung: Tapped from outside of main pump
    • Verbindung Haupt: 3"
    • Anschluss Rückspülung: 1.5"
    • Kapazität: 1,000 Liter / min, 60 m3/h
    • Rückspülung: 100 zu 150 Liter / min, 6 zu 9 m3/h
    • example pump flow: 1,000 + 100 = 1,100 Liter / min


    • Größe mm: 354 (h) 420 (Ø)
    • Gewicht: 19 kg
    • Kapazität: 264 GPM
    • Rückspülung: 26 GPM zu 39.6258 GPM
    • example pump flow: 264 + 26 = 291

    • Kapazität: 15,850 GPH
    • Rückspülung: 1,585 GPH zu 2,378 GPH
    • Example pump flow: 15,850 + 1,585 = 17,435


    • Größe Zoll: 13.9 (h) 16.5 (Ø)
    • Gewicht: 42 lb
    • Material: woven 316 stainless steel mesh
    • Käfig: 316 stainless steel
    • zentrale Turbine: 316 stainless steel
    • Jets: food grade natural rubber
    • Lager: acetal copolymer
    • Maschenweiten: 3 mm, 6 mm
    • Wasserversorgung: Tapped from outside of main pump
    • Verbindung Haupt: 3"
    • Anschluss Rückspülung: 1.5"
    • Kapazität: 1,000 Liter / min, 60 m3/h
    • Rückspülung: 100 zu 150 Liter / min, 6 zu 9 m3/h
    • example pump flow: 1,000 + 100 = 1,100 Liter / min


    • Größe mm: 354 (h) 420 (Ø)
    • Gewicht: 19 kg
    • Kapazität: 264 GPM
    • Rückspülung: 26 GPM zu 39.6258 GPM
    • example pump flow: 264 + 26 = 291

    • Kapazität: 15,850 GPH
    • Rückspülung: 1,585 GPH zu 2,378 GPH
    • Example pump flow: 15,850 + 1,585 = 17,435


    • Größe Zoll: 13.9 (h) 16.5 (Ø)
    • Gewicht: 42 lb
    • Material: perforated 304 stainless steel
    • Käfig: 316 stainless steel
    • zentrale Turbine: 316 stainless steel
    • Jets: food grade natural rubber
    • Lager: acetal copolymer