| 1 | Modellname | Turbiti 737 O2 in wall mounted enclosure | Turbiti 737 O2 in wall mounted enclosure |
| 2 | Modellnummer | turbiti_737_wallmount_galvanized-box | turbiti_737_wallmount_galvanized-box |
| 3 | Mindestdurchfluss / Minute | 150 Liter | 40 Gallone |
| 4 | Maximaler Durchfluss / Minute | 400 Liter | 106 Gallone |
| 5 | Mindestdurchfluss / Stunde | 9.0 M3 | 317.8 CF |
| 6 | Maximaler Durchfluss / Stunde | 24 M3 | 848 CF |
| 7 | Wassertemperatur Minimum | -20 ℃ | -4 ℉ |
| 8 | Wassertemperatur maximal | 50 ℃ | 122 ℉ |
| 9 | Verfügbarkeit und Größe des Schmutzfängers | No strainer on the equipment, strainer required when particles larger than 1 or 2 mm. | No strainer on the equipment, strainer required when particles larger than 1 or 2 mm. |
| 10 | Empfohlene(r) Einlassfilter | Medium pump inlet filter series
| Medium pump inlet filter series
|
| 11 | Minimale Umgebungstemperatur | -20 ℃ | -4 ℉ |
| 12 | Maximale Umgebungstemperatur | 50 ℃ | 122 ℉ |
| 13 | Relative Luftfeuchtigkeit Minimum | 0 % | 0 % |
| 14 | Relative Luftfeuchtigkeit maximal | 100 % | 100 % |
| 15 | Mindestdurchfluss / Minute | 5.0 Liter | 1.3 Gallone |
| 16 | Maximaler Durchfluss / Minute | 8.0 Liter | 2.1 Gallone |
| 17 | Mindestdurchfluss / Stunde | 300 Liter | 79 Gallone |
| 18 | Maximaler Durchfluss / Stunde | 480 Liter | 127 Gallone |
| 19 | Druck Minimum | 50 kPa | 7 PSI |
| 20 | Druck maximal | 300 kPa | 44 PSI |
| 21 | Gasqualität | No corrosive gasses: suitable for O2, air, CO2, N2 | No corrosive gasses: suitable for O2, air, CO2, N2 |
| 22 | Gas Bemerkung | The mentioned pressures are recommended pressures for bubble generation. The product itself can withstand pressures up to 500 kPa. | The mentioned pressures are recommended pressures for bubble generation. The product itself can withstand pressures up to 500 kPa. |
| 23 | Stromverbrauch der Einheit | No pump included with this product. Estimated power consumption 750-1000 watts. | No pump included with this product. Estimated power consumption 750-1000 watts. |
| 24 | Benetzte Teile | nylon based resins, PVC, EPDM rubber | nylon based resins, PVC, EPDM rubber |
| 25 | Pumpenmodell | Recommended: use of a low head centrifugal pump or pool pump | Recommended: use of a low head centrifugal pump or pool pump |
| 26 | Einstellung des Pumpendrucks | This product works well with most low head pumps. Head 10 to 15 meters. (Ask us for more details). | This product works well with most low head pumps. Head 10 to 15 meters. (Ask us for more details). |
| 27 | Kontrolle | Manual by pressure gauche | Manual by pressure gauche |
| 30 | Wassereinlass | Rigid Rc 2" female coupling with thread | Rigid Rc 2" female coupling with thread |
| 31 | Wasserauslass | rigid Rc 1" female coupling with thread | rigid Rc 1" female coupling with thread |
| 32 | Gaseinlass | 10 mm standard quick fitting, 3/8 on request | 10 mm standard quick fitting, 3/8 on request |
| 37 | Andere Bemerkungen | Easy to integrate with existing pool pumps
|
