Zurück zu: Turbiti Nanoblasenmischer
BeschreibungMetrischKaiserlich
1 Modellname Turbiti 737 Turbiti 737
2 Modellnummer turbiti_737_box304 turbiti_737_box304
FlüssigkeitMetrischKaiserlich
3 Mindestdurchfluss / Minute 150 Liter 40 Gallone
4 Maximaler Durchfluss / Minute 400 Liter 106 Gallone
5 Mindestdurchfluss / Stunde 9.0 M3 317.8 CF
6 Maximaler Durchfluss / Stunde 24 M3 848 CF
7 Wassertemperatur Minimum -20 ℃ -4 ℉
8 Wassertemperatur maximal 50 ℃ 122 ℉
9 Verfügbarkeit und Größe des Schmutzfängers No strainer, strainer required when particles larger than 1 or 2 mm. No strainer, strainer required when particles larger than 1 or 2 mm.
10 Empfohlene(r) Einlassfilter Medium pump inlet filter series
Medium pump inlet filter series
UmgebungMetrischKaiserlich
11 Minimale Umgebungstemperatur -20 ℃ -4 ℉
12 Maximale Umgebungstemperatur 50 ℃ 122 ℉
13 Relative Luftfeuchtigkeit Minimum 0 % 0 %
14 Relative Luftfeuchtigkeit maximal 100 % 100 %
GasMetrischKaiserlich
15 Mindestdurchfluss / Minute 5.0 Liter 1.3 Gallone
16 Maximaler Durchfluss / Minute 8.0 Liter 2.1 Gallone
17 Mindestdurchfluss / Stunde 300 Liter 79 Gallone
18 Maximaler Durchfluss / Stunde 480 Liter 127 Gallone
19 Druck Minimum 40 kPa 6 PSI
20 Druck maximal 350 kPa 51 PSI
21 Gasqualität No corrosive gasses: suitable for O2, air, CO2, N2 No corrosive gasses: suitable for O2, air, CO2, N2
22 Gas Bemerkung The mentioned pressures are recommended pressures for bubble generation. The product itself can withstand pressures up to 400 kPa. The mentioned pressures are recommended pressures for bubble generation. The product itself can withstand pressures up to 400 kPa.
ElektrischMetrischKaiserlich
23 Stromverbrauch der Einheit No pump included with this product. Estimated power consumption 750-1000 watts. No pump included with this product. Estimated power consumption 750-1000 watts.
24 Benetzte Teile nylon based resins, silicone tube, PPS, EPDM nylon based resins, silicone tube, PPS, EPDM
25 Pumpenmodell This product works both with submersible pumps and single stage centrifugal pumps. This product works both with submersible pumps and single stage centrifugal pumps.
26 Einstellung des Pumpendrucks This product works well with most low head pumps. Head 10 to 15 meters. (Ask us for more details). This product works well with most low head pumps. Head 10 to 15 meters. (Ask us for more details).
27 Kontrolle No automatic operation No automatic operation
Pumpe
28 @option Grundfos CM10-1
29 @option Ebara pump DWO-400
VerbindungenMetrischKaiserlich
30 Wassereinlass R 2" male connector (50 mm) R 2" male connector (50 mm)
31 Wasserauslass R 1" male connector (25 mm) R 1" male connector (25 mm)
32 Gaseinlass 10mm standard push-to-connect fitting, 3/8 on request 10mm standard push-to-connect fitting, 3/8 on request
Abmessungen & GewichtMetrischKaiserlich
33 Abm. (B) x (T) x (H) 405 x 100 x 130 mm 15.9 x 3.9 x 5.1 Zoll
34 Gewicht 2.8 Kg 6.2 lbs.
35 Versandmaße. (b)x(d)x(h) 12 x 34 x 12 cm 5 x 13 x 5 Zoll
36 Versandgewicht 5 Kg 11 lbs.
Bemerkungen
37 Andere Bemerkungen
  • The turbiti UFB mixer works normally well with low head pumps using 750 to 1000 watt of power. (ask us for more details)

Zurück zu: Turbiti Nanoblasenmischer