Aquaculture, Seawater Tsurumi Pump 50TM2.75
introduction TM
The TM-series is a submersible semi-vortex pump designed for handling wastewater and liquid carrying small solid matters. Made of Titanium and completely corrosion-resistant, this Tsurumi 50TM2.75S pond and waterfall pump is perfect for use in the toughest environments, such as with saltwater and chemicals.
Corrosion test in seawater after 6 months.
The benefit of a vortex impeller over a channel impeller is the minimized risk of clogging. The vortex impeller creates a revolving mass of water which forms a whirlpool. A whirlpool is a funnel shaped opening is created downward from the water surface. It can be developed by water flowing out of a small opening in the bottom of a basin, a reservoir or by a pump. Impellers creating this Vortex are called vortex impellers. The benefit of a vortex impeller over a channel impeller is the minimized risk of clogging. A Vortex impeller is also a better choice when the pumped liquid has a high content of sand. The efficiency of a pump with a vortex impeller is typically lower than a pump with a channel impeller.
table pump specifications
| # | Liquid specifications | 50 Hz | 60 Hz | Head |
|---|---|---|---|---|
| 1 | Maximum pump capacity liter | 350 | 341 | |
| 2 | Maximum pump capacity Gallons | 92 | 90 | |
| 3 | Liter per minute @ head | 300 | 303 | 6 Meter |
| 4 | Gallon per minute @ head | 79 | 80 | 20 Feet |
| # | Electrical specifications | - | - | - |
| 5 | Electric phase ⌀ voltage | Available in 1/115V and 1/110V 1/220V Hz, 3 Ø 400 Volt 50 Hz | ||
| 6 | Power consumption | 750 watts | ||
| 7 | Pump house material | Titanium with a fiber reinforced plastic impeller | ||
| 8 | Power cord length | 10 | ||
| # | Connections | Metric | Imperial | - |
| 9 | Water outlet | hose clamp standard, 2 inch or 50 mm threaded connections available | ||
| # | Dimensions | Metric | Imperial | - |
| 10 | Dim. (w) x (d) x (h) mm | 236 x 162 x 374 | 9 x 6 x 15 | |
| 11 | Weight | 9 Kg | 20 lbs. | |
| 12 | HS code | 8413.7010 |