Water treatment Tsurumi 50PN2.75

  • پمپ شناور برای استفاده در میکسر نانوحباب شناور.
  • برای تصفیه آب، مدیریت دریاچه و حوضچه توصیه می شود.
  • دمای آب 0 تا 40 درجه یا 32 درجه فارنهایت تا 104 درجه فارنهایت

The PN-series is a submersible semi-vortex pump designed for handling wastewater and liquid carrying small solid matters. It is made of resin and 304 stainless steel and excellent in corrosion-resistance. The semi-vortex pump design with moderate solids passage provides efficient performance for versatile applications. Liquid paraffin is used for the lubricating oil, which widens the application of the pump to decorative waterfalls, fishponds, aquaculture, etc.

The benefit of a vortex impeller over a channel impeller is the minimized risk of clogging. The vortex impeller creates a revolving mass of water which forms a whirlpool. A whirlpool is a funnel shaped opening is created downward from the water surface. It can be developed by water flowing out of a small opening in the bottom of a basin, a reservoir or by a pump. Impellers creating this Vortex are called vortex impellers. The benefit of a vortex impeller over a channel impeller is the minimized risk of clogging. A Vortex impeller is also a better choice when the pumped liquid has a high content of sand. The efficiency of a pump with a vortex impeller is typically lower than a pump with a channel impeller.

Installation of the 50PN 2.75 Tsurumi in the submersible turbiti nanobubble mixer. Click through the photo carouser above to see the pictures and the various steps involved.

Photo 1.  Top image overview of the pump as it is supplied by your distributor.

Tsurumi pump base 50PN 2.75

Photo 2. Remove the pump base loosen 4 screws with a star screwdriver or a 13/32" wrench alternatively a 10 mm wrench. Keep in mind that the head of the bolt is imperial.

Tsurumi pump bracket 50PN2.75

Photo 3. Mount the supplied pump frame, please check that the large rubber O-ring is kept in place between pump and aluminum frame.

Overview impelller of the Tsurumi 50PN 2.75

Photo 4. Mounting the pump turn it a quarter so the wire is pointing towards the back wall of the pump frame. Mounting it differently is not possible as the hook will be in the way.

Overview Tsurumi 50PN2.75 pump with acniti pump bracket

Photo 5. Overview of the final result Tsurumi 50PN 2.75 with mounting plate.

# مایع مشخصات فنی 50 هرتز60 هرتزHead
0حداکثر ظرفیت پمپ لیتر380379
1حداکثر ظرفیت پمپ گالن100100
2Liter per minute @ head300 3036   Meter
3Gallon per minute @ head798020   Feet
# برقی مشخصات فنی ---
4فاز الکتریکی ⌀ ولتاژیک فاز (1 Ø) 110 ولت یا یک فاز (1 Ø) 220 ولت، سه فاز (3 Ø) 200 الی 240 ولت، سه فاز (3 Ø) 380 الی 600 ولت
5مصرف برق750 وات
6Pump house materialرزین تقویت شده با الیاف شیشه، فولاد ضد زنگ SUS304
7طول سیم برق5 یا 6 متر متر
8مجرای خروج آب50 میلی متر یا 2 اینچ
9Dim. (w) x (d) x (h) میلی متر335 x 236 x 374 13 x 9 x 15
10وزن10 کیلوگرام22 پوند
11HS code8413.7010