Landbouw en tuinrbouw Tsurumi LB480

Onderwaterpomp voor gebruik in de ultrafijne bellenmixer met duikvermogen.
Aanbevolen voor land- en tuinbouwtoepassingen.
Watertemperatuur 0 ° C tot 40 ° C

LB-480 has a urethane Semi Vortex Impeller and elastomer lined pump casing for maximum wear life. The benefit of a vortex impeller over a channel impeller is the minimized risk of clogging. The vortex impeller creates a revolving mass of water which forms a whirlpool. A whirlpool is a funnel shaped opening is created downward from the water surface. It can be developed by water flowing out of a small opening in the bottom of a basin, a reservoir or by a pump. Impellers creating this Vortex are called vortex impellers. The benefit of a vortex impeller over a channel impeller is the minimized risk of clogging. A Vortex impeller is also a better choice when the pumped liquid has a high content of sand. The efficiency of a pump with a vortex impeller is typically lower than a pump with a channel impeller.

Installation

Installation of the LB480 Tsurumi in the submersible ultrafine bubble mixer. Click through the photo carouser above to see the pictures and the various steps involved.

Photo 1. Overview of the top of the pump as it is supplied by your distributor

Photo 2. Remove the handle and the water outlet with a 13 mm socket wrench or normal 13 mm wrench.

Photo 3. In the submersible kit supplied by Acniti you will find a threaded water outlet, which needs to be assembled with the same nuts as originally on the pump. Secondly pull the power cord through the hole in the metal plate and mount the metal plate with the supplied nut bolt and washers.

Photo 4. Overview of the top of the pump without the handle and water outlet. 

Photo 5. Overview of the pump with the new water outlet and metal plate mounted on the pump. 

After installation test the pump in swallow water and check if no water is coming out of the bottom or top of the bolt holes, if this is the case revise the mounting and trouble shoot your installation work.

#Vloeistof specificatie50 Hz60 HzHead
1Pomp capaciteit in liter (maximaal)225235
2Pomp capaciteit in Gallon (maximaal)5962
3Liter per minute @ opvoerhoogte200 2163   Meter
4Gallon per minute @ opvoerhoogte535710   Feet
#Electrisch specificatie---
5Elektrische fase ⌀ spanning1 Ø 220 Volt
6Stroom verbruik480 watt
7Pomphuis materiaalEtylene Propylene Rubber, Urethane Rubber
8Lengte van de stroomkabel5 meters Meter
#Aansluitingen MetrischImperial-
9Water afvoer50 mm
#Dimensies MetrischImperial-
10Dim. (l) x (b) x (h) mm189 x 233 x 286 7 x 9 x 11
11Gewicht11,3 Kg25 lbs
12HS code8413.7010
13Dim. (l) x (b) x (h)23 x 21 x 34 1 x 1 x 1
14Verzendgewicht12 Kg26 lbs

Recommended

.
acniti nano bubble mixer dompelunit

Onderwater UFB mixer

Deze pomp is geschikt voor de Dompel Unit UFB mixer en aanbevolen voor toepassingen in de land- en tuinbouw

Explore


Vragen

acniti is gespecialiseerd in de verkoop en marketing van ultrafijn bubbels en nanobubbels technologie, om groei te versnellen.

Bubbel technologie is de volgende revolutie in water en vloeistoffen om hun eigenschappen te veranderen door gassen op te lossen, ter verbetering van biologische processen, innoveren van reiniging en desinfectie in een breed scala van toepassingen.

Producten



RF200

Smart zelfreinigende filters

Contact

acniti LLC
1-2-9 Nyoidani
Minoh Osaka
〒562-0011
Japan