Aquaculture, Seawater Tsurumi Pump 50TM2.75

Aquaculture, Seawater Tsurumi Pump 50TM2.75

Submersible pump for usage in the submersible ultrafine bubble mixer.
Recommended for aquaculture and seawater applications.
Water temperature 0°C to 40° or 32°F to 104°F
Semi-vortex, FRP (Fiberglass Reinforced Plastic), impeller passes solids and stringy material without clogging and increases wear resistance when pumpage contains abrasive particles
Utilization of application appropriate FRP & TITANIUM components increases corrosion resistance in a wide variety of applications
Double Inside Mechanical Seal with SIC faces provides the longest operational life
in
Ring Seal Protector protects mechanical seal from abrasive particles
C3 Ball Bearings Rated for a B-10 life of up to 60,000 hours

The TM-series is a submersible semi-vortex pump designed for handling wastewater and liquid carrying small solid matters.  Made of Titanium and completely corrosion-resistant, this Tsurumi 50TM2.75S pond and waterfall pump is perfect for use in the toughest environments, such as with saltwater and chemicals.

Corrosion test in seawater after 6 months.

The benefit of a vortex impeller over a channel impeller is the minimized risk of clogging. The vortex impeller creates a revolving mass of water which forms a whirlpool. A whirlpool is a funnel shaped opening is created downward from the water surface. It can be developed by water flowing out of a small opening in the bottom of a basin, a reservoir or by a pump. Impellers creating this Vortex are called vortex impellers. The benefit of a vortex impeller over a channel impeller is the minimized risk of clogging. A Vortex impeller is also a better choice when the pumped liquid has a high content of sand. The efficiency of a pump with a vortex impeller is typically lower than a pump with a channel impeller.

#Vloeistof specificatie50 Hz60 HzHead
1Maximum pump capacity liter350341
2Maximum pump capacity Gallons9290
3Liter per minute @ head300 3036   Meter
4Gallon per minute @ head798020   Feet
#Electrisch specificatie---
5Electric phase ⌀ voltage3 Ø 400 Volt 50 Hz
6Power consumption750 Watt
7Pump house materialTitanium with a fiber reinforced plastic impeller
8Power cord length10 meters Meter
#Aansluitingen MetrischImperial-
9Water outlethose clamp standard, 2 inch or 50 mm threaded connections available
#Dimensies MetrischImperial-
10Dim. (l x (b) x (h) mm236 x 162 x 374 9 x 6 x 15
11Weight9 Kg20 lbs
12HS code8413.7010

Recommended

.
acniti UFB mixer dompelunit

Submersible UFB mixer

This pump is suitable for the submersible ultrafine bubble mixer and recommended for seawater and aquacultureapplications

Explore


Vragen

acniti is gespecialiseerd in de verkoop en marketing van ultrafijn bubbels en nanobubbels technologie, om groei te versnellen.

Bubbel technologie is de volgende revolutie in water en vloeistoffen om hun eigenschappen te veranderen door gassen op te lossen, ter verbetering van biologische processen, innoveren van reiniging en desinfectie in een breed scala van toepassingen.

1 Ø 220 VAC




Contact

acniti LLC
1-2-9 Nyoidani
Minoh Osaka
〒562-0011
Japan

+81 70 4422 8292