Agriculture Horticulture Tsurumi LB 480

Agriculture Horticulture Tsurumi LB 480

Submersible pump for usage in the submersible ultrafine bubble mixer.
Recommended for agriculture and horticulture applications.
Water temperature 0°C to 40° or 32°F to 104°F

LB-480 has an urethane Semi Vortex Impeller and elastomer lined pump casing for maximum wear life. The benefit of a vortex impeller over a channel impeller is the minimized risk of clogging. The vortex impeller creates a revolving mass of water which forms a whirlpool. A whirlpool is a funnel shaped opening is created downward from the water surface. It can be developed by water flowing out of a small opening in the bottom of a basin, a reservoir or by a pump. Impellers creating this Vortex are called vortex impellers. The benefit of a vortex impeller over a channel impeller is the minimized risk of clogging. A Vortex impeller is also a better choice when the pumped liquid has a high content of sand. The efficiency of a pump with a vortex impeller is typically lower than a pump with a channel impeller.

Installation

Installation of the LB480 Tsurumi in the submersible ultrafine bubble mixer. Click through the photo carouser above to see the pictures and the various steps involved.

Photo 1. Overview of the top of the pump as it is supplied by your distributor

Photo 2. Remove the handle and the water outlet with a 13 mm socket wrench or normal 13 mm wrench.

Photo 3. In the submersible kit supplied by Acniti you will find a threaded water outlet, which needs to be assembled with the same nuts as originally on the pump. Secondly pull the power cord through the hole in the metal plate and mount the metal plate with the supplied nut bolt and washers.

Photo 4. Overview of the top of the pump without the handle and water outlet. 

Photo 5. Overview of the pump with the new water outlet and metal plate mounted on the pump. 

After installation test the pump in swallow water and check if no water is coming out of the bottom or top of the bolt holes, if this is the case revise the mounting and trouble shoot your installation work.

#Vloeistof specificatie50 Hz60 HzHead
1Maximum pump capacity liter225235
2Maximum pump capacity Gallons5962
3Liter per minute @ head200 2163   Meter
4Gallon per minute @ head535710   Feet
#Electrisch specificatie---
5Electric phase ⌀ voltage1 Ø 220 Volt
6Power consumption480 Watt
7Pump house materialEtylene Propylene Rubber, Urethane Rubber
8Power cord length5 meter Meter
#Aansluitingen MetrischImperial-
9Water outlet50 mm
#Dimensies MetrischImperial-
10Dim. (l x (b) x (h) mm189 x 233 x 286 7 x 9 x 11
11Weight11,3 Kg25 lbs
12HS code8413.7010
13Ship Dim. (w) x (d) x (h)23 x 21 x 34 1 x 1 x 1
14Ship weight12 Kg26 lbs

Recommended

.
acniti UFB mixer dompelunit

Submersible UFB mixer

Deze pomp is geschikt voor de Dompel Unit UFB mixer en aanbevolen voor toepassingen in de land- en tuinbouw

Explore


Vragen

acniti is gespecialiseerd in de verkoop en marketing van ultrafijn bubbels en nanobubbels technologie, om groei te versnellen.

Bubbel technologie is de volgende revolutie in water en vloeistoffen om hun eigenschappen te veranderen door gassen op te lossen, ter verbetering van biologische processen, innoveren van reiniging en desinfectie in een breed scala van toepassingen.

1 Ø 220 VAC




Contact

acniti LLC
1-2-9 Nyoidani
Minoh Osaka
〒562-0011
Japan

+81 70 4422 8292