Water treatment Tsurumi HSD2.55S
The HSD series are submersible single-phase portable pumps. The shaft-mounted agitator prevents "Air Lock" that tends to take place on vortex or semi-vortex pumps*. The rubber/resin-made stand protects the floor surface from scratching.
The benefit of a vortex impeller over a channel impeller is the minimized risk of clogging. The vortex impeller creates a revolving mass of water which forms a whirlpool. A whirlpool is a funnel shaped opening is created downward from the water surface. It can be developed by water flowing out of a small opening in the bottom of a basin, a reservoir or by a pump. Impellers creating this Vortex are called vortex impellers. A Vortex impeller is also a better choice when the pumped liquid has a high content of sand. The efficiency of a pump with a vortex impeller is typically lower than a pump with a channel impeller.
Specifications
| # | Liquid specifications | 50 Hz | 60 Hz | Head |
|---|---|---|---|---|
| 1 | Maximum pump capacity liter | 220 | 220 | |
| 2 | Maximum pump capacity Gallons | 58 | 58 | |
| 3 | Liter per minute @ head | 200 | 201 | 3 Meter |
| 4 | Gallon per minute @ head | 53 | 53 | 10 Feet |
| # | Electrical specifications | - | - | - |
| 5 | Electric phase ⌀ voltage | 1 Ø 115 VAC or 1 Ø 220 VAC | ||
| 6 | Power consumption | 550 watts | ||
| 7 | Pump house material | Cast Iron, Ductile Cast Iron(HSD) Urethane Rubber , High Chrome Cast Iron(HSD) 403 Stainless Steel Aluminum alloy 304 Stainless Steel Silicon Carbide NBR (Nitrile Butadiene Rubber) | ||
| 8 | Power cord length | 5 meters Meter | ||
| # | Connections | Metric | Imperial | - |
| 9 | Water outlet | 50 mm or 2" | ||
| # | Dimensions | Metric | Imperial | - |
| 10 | Dim. (w) x (d) x (h) mm | 186 x 241 x 391 | 7 x 9 x 15 | |
| 11 | Weight | 14 Kg | 31 lbs. | |
| 12 | HS code | 8413.7010 |