0 results found.

Agriculture Horticulture Tsurumi LB 480

  • Submersible pump for usage in the submersible ultrafine bubble mixer.
  • Recommended for agriculture and horticulture applications.
  • Water temperature 0°C to 40° or 32°F to 104°F

Slideshow Items

LB-480 has a urethane Semi Vortex Impeller and elastomer lined pump casing for maximum wear life. The benefit of a vortex impeller over a channel impeller is the minimized risk of clogging. The vortex impeller creates a revolving mass of water which forms a whirlpool. A whirlpool is a funnel shaped opening is created downward from the water surface. It can be developed by water flowing out of a small opening in the bottom of a basin, a reservoir or by a pump. Impellers creating this Vortex are called vortex impellers. The benefit of a vortex impeller over a channel impeller is the minimized risk of clogging. A Vortex impeller is also a better choice when the pumped liquid has a high content of sand. The efficiency of a pump with a vortex impeller is typically lower than a pump with a channel impeller.

Installation of the LB480 Tsurumi in the submersible ultrafine bubble mixer. Click through the photo carouser above to see the pictures and the various steps involved.

Photo 1. Overview of the top of the pump as it is supplied by your distributor

Pump as supplied by the pump manufacturer

Photo 2. Remove the handle and the water outlet with a 13 mm socket wrench or normal 13 mm wrench.

Removed parts, not required for operation

Photo 3. In the submersible kit supplied by Acniti you will find a threaded water outlet, which needs to be assembled with the same nuts as originally on the pump. Secondly pull the power cord through the hole in the metal plate and mount the metal plate with the supplied nut bolt and washers.

Parts to be mounted on the pump for placing in submersible unit

Photo 4. Overview of the top of the pump without the handle and water outlet. 

Pump with removed handle and outlet

Photo 5. Overview of the pump with the new water outlet and metal plate mounted on the pump. 

Parts mounted on pump, ready for placing in the submersible unit

After installation test the pump in swallow water and check if no water is coming out of the bottom or top of the bolt holes, if this is the case revise the mounting and trouble shoot your installation work.

# Liquid specifications 50 Hz60 HzHead
1Maximum pump capacity liter225235
2Maximum pump capacity Gallons5962
3Liter per minute @ head200 2163   Meter
4Gallon per minute @ head535710   Feet
# Electrical specifications ---
5Electric phase ⌀ voltage1 Ø 110 VAC or 1 Ø 220 VAC
6Power consumption480 watts
7Pump house materialEthylene Propylene Rubber, Urethane Rubber
8Power cord length5 meters Meter
#ConnectionsMetricImperial-
9Water outlet50 mm or 2"
#DimensionsMetricImperial-
10Dim. (w) x (d) x (h) mm189 x 233 x 286 7 x 9 x 11
11Weight11.3 Kg25 lbs.
12HS code8413.3030
13Dim. (w) x (d) x (h)23 x 21 x 34 1 x 1 x 1
14Shipping weight12 Kg26 lbs.